Axis 7000 User Manual page 41

AXIS 7000/FX User's Manual
Using the Wizard
Important!
• The Network settings for the TCP/IP and E-mail (SMTP) protocols must be specified by
the Administrator before the AXIS 7000/FX can be used for distributing reproduced
documents on the network. You can optionally configure the External Address Book
for automatic retrieval and loading of e-mail addresses and/or other destination
types.
• In order to prevent conflicts with other network devices please be sure to acquire a
unique and unused IP address from your Network Administrator.
The Wizard provides a convenient way to set up the AXIS 7000/FX in
your networking environment. Follow the instructions below to configure
the supported networking protocols:
1. Click Network Settings.
2. Click Wizard
configuration procedures for each of the supported network
protocols.
3. Click Detailed View to verify the settings.
Note:
The Wizard configures each supported protocol one at a time, i.e. after
configuring TCP/IP you must then initiate another pass of the Wizard to
configure the E-mail (SMTP) protocols and External Address Book.
4. Click Close.
Configuring the AXIS 7000/FX
to have the AXIS 7000/FX guide you through the
41