Purpose of this section
Monitor Adjustments
Factory Reset of LCD settings
LOGIQ C9 Series – Basic Service Manual
5482298-100 English Rev. 5
LCD Monitor adjustments
This section describes how to test and adjust the scanner.
These tests are optional. You may use them to check the
system for errors.
Please refer to User Manual for how to adjust the LCD Monitor
Position, Brightness and Contrast
The LCD Brightness and Contrast adjust buttons are at the right
side bottom of LCD.
Figure 6-1. LCD Brightness and Contrast adjust buttons
1. Left key: adjustment (-) button
2. Middle key: press to display Brightness or contrast
indicators
3. Right key: adjustment (+) button
Keep pressing the Middle key for 3 to 5 seconds, the Brightness
and Contrast are reset to factory default setting.
It is recommended to set the brightness value as 50.
LCD Monitor adjustments
6-3