Connectivity Setup; Introduction; Physical Connection - GE Vivid 3N Pro Series Service Manual

GE M S
EDICAL YSTEMS
D FK091075, R
IRECTION
Section 3-9

Connectivity Setup

3-9-1

Introduction

The Vivid 3N Pro/Expert ultrasound unit can be connected to various connectivity devices, such as
DICOM devices and EchoPac servers. The following sections describe how to connect the system to a
remote archive/work station or a DICOM service, using a TCP/IP connection.
3-9-2

Physical Connection

3-9-2-1 Ethernet Switch Connections
An Ethernet Switch, is used to connect the Vivid 3N Pro/Expert system to an EchoPAC PC and a
network printer.
Informative LEDS
Table 3-24
Position
04
EVISION
Figure 3-30 Ethernet Switch Identifications
MDI Button Position Descriptions
Label
To PC
To HUB
Chapter 3 Installation
X
To connect an end station or a Server to the Port
=
To connect a HUB or another Switch to the Port
V 3N P /E S
IVID RO XPERT ERVICE
Ethernet Cable
connectors
MDI Button
Controls the fifth
connector, making it
crossed or non-crossed.
Function
M
ANUAL
3-49