Image Vault Server - GE Vivid 3N Pro Series Service Manual

GE M S
EDICAL YSTEMS
D FK091075, R
IRECTION
3-9-7

Image Vault Server

If Image Vault Server is required, make sure that the Image Vault Server checkbox is selected, as
shown in
a.) Enter ECHOPAC7-OOOXXX-DB in the Database Name field.
b.) Under Store Info, make sure that the Hard Drive checkbox is selected.
c.) Enter \\ECHOPAC7-000XXX\Archive in the Placement of Image Files field.
d.) Select the Allow Multiframe and/or Allow Raw Data checkboxes, as required.
e.) Under the Image Settings field, select the required settings.
3-64
04
EVISION
Figure 3-47 below, then proceed as follows:
(It is recommended to leave both checkboxes activated, as shown in
Figure 3-47 Services Tab - Image Vault Server Expanded
Section 3-9 - Connectivity Setup
V 3N P /E S
IVID RO XPERT ERVICE
Figure 3-47
M
ANUAL
below).