GE Vivid 3N Pro Series Service Manual page 455

GE M S
EDICAL YSTEMS
D FK091075, R
IRECTION
8-5-12-5 BEP2 - ECG Module Removal Procedure (cont'd)
Two screws
9) Disconnect the footswitch cable from the KB Controller card.
10.)Disconnect the COM2 cable from the rear of the ECG Module.
11) Carefully slide out the ECG Module from the front of the BEP.
04
EVISION
Figure 8-72 ECG Module Removal- BEP2
Chapter 8 Replacement Procedures
V 3N P /E S
IVID RO XPERT ERVICE
M
ANUAL
8-85