GE Vivid 3N Pro Series Service Manual page 447

GE M S
EDICAL YSTEMS
D FK091075, R
IRECTION
8-5-10-4 CDRW Drive Installation Procedure
Note: Before installing the new CDRW Drive, make sure the jumper settings closest to the data
cable are shorted as follows:
1.) For BEP1:
Assemble the black plastic slides provided with the CDRW drive, or use those from the drive
previously removed.
For BEP2:
Use the metal slides provided with the CDRW drive, or use those from the drive previously
removed.
2) Carefully slide the CDRW Drive into the front of the BEP (refer to
Removal" on page
3) Reconnect the cables (data and power) to the rear of the CDRW Drive.
4) Install the BEP left and right side covers, as described in the appropriate procedure:
8-5-2-4 "BEP1 - Left and Right Side Cover Installation Procedure" on page
- Side Cover Installation Procedure" on page
5.) Reconnect the power cable to the rear of the BEP.
6) Return the Vivid 3N rear, left and right covers - see the
on page 8-4
04
EVISION
Data cable
Power cable
Slave Master
8-76).
and 8-2-4 "Rear Cover Replacement Procedures" on page
Chapter 8 Replacement Procedures
V 3N P
IVID
Figure 8-66 "CDRW Drive
8-64.
8-2-2-4 "Side Covers Installation Procedure"
/E S M
RO XPERT ERVICE ANUAL
8-62, or 8-5-3-4 "BEP2
8-7.
8-77