GE Vivid 3N Pro Series Service Manual page 502

GE M S
EDICAL YSTEMS
D FK091075, R
IRECTION
8-8-3-6 JVC VCR Installation Procedure (cont'd)
AUDIO OUT
13.)Return the console bottom metal cover (upper section) (removed in
cable loom is properly aligned to pass through the slot in the cover and that there is no kinking or
pinching of the cables. Screw the cover firmly in position as described in
Bottom Cover (Upper Section) Installation Procedure" on page
14.)Re-install the Connectors Panel Cover as described in
Installation Procedure" on page
15) Reconnect the mains AC power cable from the wall outlet.
16) Turn ON the main circuit breaker located on rear of the Vivid 3N.
17) Turn ON the Vivid 3N by pressing the ON/OFF button on the Control Console.
18.)Under System Configuration, VCR/ECG Tab, select the JVC VCR option. For more information, see
3-8-9 "VCR/ECG Tab" on page
19.)Insert a blank video casette tape into the VCR and perform a test recording to check correct
operation.
8-132
04
EVISION
S-VIDEO OUT
AUDIO IN
Figure 8-115 Vivid 3N Left Rear Panel Connectors
Section 8-8 - Peripherals
8-2-5-4 "Connector Panels Cover
8-8.
3-44.
V 3N P /E S
IVID RO XPERT ERVICE
RS-232C
S-VIDEO IN
step 3). Make sure the VCR
8-2-10-4 "Control Console
8-19.
M
ANUAL