Annotation Settings Tab - GE Vivid 3N Pro Series Service Manual

Table of Contents

Annotation Settings Tab

1) Press Config on the alphanumeric keyboard. The System Configuration window is displayed.

2) Trackball to the Annotation Settings tab and press Select. The Annotation Settings tab is

displayed, as shown below:

3) Define the primary and secondary fonts to be used for annotations, as follows:

After setting the font type for the annotations the user can change the font type during

annotation typing by pressing on the Menu key and selecting the required font from the

drop-down list. Thereafter, additional typing will be in the newly-modified font.

4.) Select the required Bodymark position from the available selections (Left-bottom; Left-top; Right

top; Right bottom).

Figure 3-23 Annotation Settings Tab

Trackball to the font to be defined (Primary or Secondary) in the Fonts area and press Select.

The font name is highlighted.

Trackball to the Change button and press Select. The Font dialog box is displayed.

Trackball to the required font, color, style and size and press Select for each choice.

Trackball to OK and press Select. The font is defined.

In the Home position for text area, set the home position for the text cursor, by entering the

X and Y coordinates into the X and Y fields, as required.

Section 3-8 - System Configuration