GE Vivid 3N Pro Series Service Manual page 495

GE M S
EDICAL YSTEMS
D FK091075, R
IRECTION
8-8-2-5 Sony VCR Removal Procedure
1.) Remove the Connectors Panels Cover as described in
Procedure" on page
2.) If optional shelf is present, refer to the
8-139.
3.) Release the B/W printer by undoing the fastening belt around it (together with the VCR, if present).
4.) Disconnect the RS-232C cable, the Audio and S-Video IN and OUT cables, and Power cord from
VCR's rear as shown in
5.) Remove the VCR from the left side of the Vivid 3N ultrasound unit (taking it out from below the
control console and from beside the B/W printer, if present) - refer to
Recorder (VCR) Installed in the Vivid 3N Ultrasound Unit Configuration with UP2950 Printer" on
page
04
EVISION
8-8.
Figure 8-108 "Sony VCR Connection Cables" on page
8-123.
Chapter 8 Replacement Procedures
V
IVID
8-2-5-3 "Connector Panels Cover Removal
8-8-4-5 "Color Video Printer Removal - Procedure 1" on page
3N P /E S
RO XPERT ERVICE
8-124.
Figure 8-106 "Video Cassette
M
ANUAL
8-125