Table of Contents
Advertisement
GE M
S
EDICAL
YSTEMS
D
FK091075, R
IRECTION
8-8-4-8
Color Video Printer Settings
NOTE:
The settings for the Sony UP-2800P and UP2950MD Color Video Printers are regulated using the Video
Printer Control Panel, as described below.
8-8-4-8-1
Preparations
1.) Turn ON the main circuit breaker located on rear of the Vivid 3N.
2) Turn ON the Vivid 3N by pressing the ON/OFF button on the Control Console.
3.) Open the front door of the Color Video Printer.
4.) Press MENU.
The Preset menu is displayed (see
There are five setup categories: COLOR (c), LAYOUT (l), PRINTER (p), INPUT (i) and OUTPUT
(o). Each setup category can be selected from the Top menu of each category.
Figure 8-124 Color Video Printer Control Panel and Printer Window Display
8-8-4-8-2
Color Setup
1.) Select COL using the
is displayed on the Printer Window display
Figure 8-125 Color Video Printer Window Display (COLOR ADJUST top menu displayed)
2.) In the COLOR ADJUST menu, adjust the required parameters (according to those shown in
8-6 "WINDOW SETUP Parameters" on page
the
04
EVISION
or
or
button; for each selected parameter, adjust the value using the
Chapter 8 Replacement Procedures
Figure 8-124
below).
button (see
Figure
8-124, above). The COLOR ADJUST top menu
(Figure 8-125
8-142) by selecting the parameters one-by-one, using
V
3N P
/E
S
IVID
RO
XPERT
below).
M
ERVICE
ANUAL
Table
or
button.
8-141
Advertisement
Table of Contents
