System Turnover Checklist; Software Configuration Checks - GE Vivid 3N Pro Series Service Manual

GE M S
EDICAL YSTEMS
D FK091075, R
IRECTION
Section 4-5

System Turnover Checklist

Before returning the Vivid 3N ultrasound scanner to regular operational use, the System Configuration
settings should be checked. In 2D-Mode, press Config on the keyboard and check the settings in
accordance with those listed in
NOTE: The figures in this section
used for reference only, as each site has its own specific settings.
4-5-1

Software Configuration Checks

Table 4-42
Step
1
2
3
4
5
6
7
4-26
04
EVISION
(Figure 4-1
Software Configuration Checklist
Check the date and time settings.
Check the language settings.
Ensure that all of the options are configured correctly.
Ensure that the hospital details are configured correctly.
Ensure that the VCR and ECG are configured as required for the specific site and country.
Ensure that the measurement units are configured as required for the specific site and country.
Ensure that the connectivity network settings have not been modified and are configured as required
for the specific site.
Section 4-5 - System Turnover Checklist
Table 4-42 below, referring also to
through Figure 4-6) show example configurations and should be
Task
V 3N P /E S
IVID RO XPERT ERVICE
Figure 4-1 through Figure
M
ANUAL
4-6.
Check