Table of Contents
Advertisement
OPERATION
GREASE PUMP HOLDER
It is inside the door on the rear right of the machine. Keep the
grease pump hooked on the grease pump holder while it is not
used.
FIRE EXTINGUISHER
(if equipped)
A fire extinguisher is provided at the rear part inside the opera-
tor's cab.
The directions are described on the nameplate affixed to the
fire extinguisher. Carefully read and understand them before-
hand for emergencies.
BATTERY DISCONNECT SWITCH
•
Do not operate the battery disconnect switch while the engine is running.
The large current generated by the alternator may burn the electric parts and cause a fire.
Operate the battery disconnect switch only when the engine is stopped.
•
If the battery disconnect switch is turned to OFF position, always remove the switch key.
If someone turns the key to ON position carelessly, this is extremely dangerous.
NOTICE
•
Keep the battery disconnect switch in ON position except the following cases.
•
When the machine is stored for a long time (more than a month)
•
When repairing the electrical system
•
When performing the electric welding
•
When handling the battery
•
When replacing the fuse, etc.
•
Do not turn the battery disconnect switch to OFF position while the system operating lamp is lit. If
the battery disconnect switch is turned off while this lamp is lit, the data in the controller may be
lost.
•
If this switch is turned to OFF position, all the electrical system is cut out and the functions of KOM-
TRAX stop. In addition, the time information of the clock and the radio tuning information may be
lost. In this case, set it again by referring to "CLOCK ADJUSTMENT (3-80)" and "HANDLING RADIO
(3-236)".
k
k
CAUTION
EXPLANATION OF COMPONENTS
3-113
Advertisement
Chapters
Table of Contents
