Table of Contents
Advertisement
OPERATION
•
If the caution lamp is displayed, press the switch F6 to re-
turn to the standard screen, and check the content of the
abnormality or warning display.
While the caution lamp is flashing, if no lever is operated
for 10 seconds or more, the screen automatically returns
to the standard screen.
When the screen returns to the standard screen, the cau-
tion lamp at the top left of the screen goes out and the
caution lamp and action level are displayed on the center
of the screen.
•
If a caution lamp is displayed, move the machine to set it
in a safe posture, then have inspection performed immedi-
ately.
•
For the contents of the warning display, see "WARNING
DISPLAY (3-15)" and "TROUBLES AND ACTIONS
(3-262)".
ENERGY MONITOR SCREEN SELECTOR SWITCH
When the function switch F2 is pressed on the standard
screen, the monitor display screen switches to the Energy
Monitor screen.
On the Energy Monitor screen, the power transmitting condition
between the components and the momentary fuel consumption
are displayed.
•
(A) to (F) indicate the power flow condition between the
components.
(A): Between engine and motor-generator
(B): Between motor-generator and capacitor
(C): Between motor-generator and electric swing motor
(D): Between capacitor and electric swing motor
(E): Between hydraulic pump and work equipment cylinder
(F): Between motor-generator and hydraulic pump
•
(G) indicates the momentary fuel consumption.
•
Press the function switch F5, and the screen returns to the
standard screen.
EXPLANATION OF COMPONENTS
3-57
Advertisement
Chapters
Table of Contents
