Komatsu HB365LC-3 Operation & Maintenance Manual page 145

OPERATION
Perform the setting for the attachment 2.
Ask your Komatsu distributor to have the monitor setting changed so that two attachments are available if the
attachment 2 system is to be equipped.
The oil flow rate in ATT mode can be adjusted according to the installed attachment. Use the setting menu for
the attachment 2 if the machine is equipped with the attachment 2 system.
Changing "Attachment Oil Flow Rate Setting"
1.
When attachment 2 is set, the oil flow in "2-Way Attach-
ment Oil Flow Rate Setting" screen is as shown in the right
figure. Select the oil flow setting to be changed and press
the switch F2.
(a): Oil flow rate in attachment 1
(b): Oil flow rate in attachment 2
2.
"2-Way Attachment Oil Flow Rate Setting" screen is dis-
played.
On "2-Way Attachment Oil Flow Rate Setting" screen, you
can perform the following operations with switches F1 to
F6.
F1: Switches the display from attachment 2 oil flow setting
screen to attachment 1 oil flow setting screen.
F2: Switches the display from attachment 1 oil flow setting
screen to attachment 2 oil flow setting screen.
F3: Decreases the flow rate by 1 level.
F4: Increases the flow rate by 1 level.
F5: Returns the screen to "Breaker Setting" screen without
changing the flow rate.
F6: Validates the flow rate, and returns the screen to
"Breaker Setting" screen.
(X): Current oil flow rate setting
(Y): Min. adjusted oil flow rate
(Z): Max. adjusted oil flow rate
• The guidance icon "ATT2" (c) is displayed on the at-
tachment 1 oil flow setting screen, and the guidance icon "ATT1" (d) is displayed on the attachment 2
oil flow setting screen.
• Flow rate cannot be changed at "No Attachment" setting.
EXPLANATION OF COMPONENTS
3-73