Table of Contents
Advertisement
OPERATION
REMARK
To return to the standard screen without changing the
working mode, press the switch F5.
3.
After selecting the desired mode, press the switch F6 and
the mode is displayed in the center of the machine monitor
display.
(Example: When the power mode is selected: P)
4.
After 2 seconds, the working mode display at the top right
of the screen is highlighted in yellow.
5.
After 2 seconds, the screen returns to the standard screen.
The working mode display highlighted in yellow in step 4
returns to blue.
REMARK
When setting the working mode to B mode, to ensure safe-
ty, the buzzer sounds and at the same time, the message
in the illustration is displayed. Press the switch F6 always
when setting to the breaker mode.
When switch F5 is pressed, the breaker mode is not set,
and the screen returns to the working mode selection
screen.
EXPLANATION OF COMPONENTS
3-47
Advertisement
Chapters
Table of Contents
