Komatsu HB365LC-3 Operation & Maintenance Manual page 144

EXPLANATION OF COMPONENTS
1.
On "Attachment Setting" screen, select a setting to change
its name, then press the switch F6.
2.
"Attachment Name Setting" screen is displayed.
On "Attachment Setting" screen, you can perform the fol-
lowing operations with switches F1 to F6.
F1: "CLEAR" Clears all the letters. (If some letters are left.)
F1: "DEFAULT" Displays the initial name. (If all the letters
are deleted.)
F2: Moves to the right letter.
F3: Moves to the next alphabet, numeral, or symbol.
F4: Moves to the previous alphabet, numeral, or symbol.
F5: Returns the screen to the attachment setting screen without changing the name.
F6: Enters the change and returns the screen to the attachment setting screen.
It is not possible to change the name for "No Attachment" setting.
Changing "2-Way Attachment Oil Flow Rate Setting"
1.
On "Attachment Setting" screen, select a setting to change
its oil flow rate, then press the switch F2.
2.
"2-Way Attachment Oil Flow Rate Setting" screen is dis-
played.
On "2-Way Attachment Oil Flow Rate Setting" screen, you
can perform the following operations with switches F3 to
F6.
F3: Decreases the flow rate by 1 level.
F4: Increases the flow rate by 1 level.
F5: Returns the screen to "Attachment Setting" screen
without changing the oil flow rate.
F6: Enters the oil flow rate setting and returns the screen
to "Attachment Setting" screen.
(X): Current oil flow rate setting
(Y): Min. adjusted oil flow rate
(Z): Max. adjusted oil flow rate
Flow rate cannot be changed at "No Attachment" setting.
3-72
OPERATION