OPERATION
When returning the mirror to its regular position, perform the
following adjustment.
1.
Adjust stay (1).
Mounting position (2): 69 mm
Mounting angle (3): 83 °
Mounting angle (4): 88 °
2.
Adjust mirror (5).
Tightening torque of mounting bolt (6): 6.0 to 7.0 Nm {0.61
to 0.71 kgm}
Mounting position (7): 166 mm
NOTICE
•
Tighten the right and left bolts of each bracket al-
ternately so that their right and left clearances (R)
and (L) become equal.
•
If the mirror and stay mounting bolts are tightened
excessively, the bracket may be damaged. Be sure
to tighten bolts to the specified torque.
MACHINE OPERATIONS AND CONTROLS
3-167