Komatsu HB365LC-3 Operation & Maintenance Manual page 142

EXPLANATION OF COMPONENTS
2.
On the "Breaker Setting" screen shown in the figure, select
the breaker to adjust and press the switch F6.
On the "Breaker Setting" screen shown in the figure, you
can perform the following operations with switches F1 to
F6.
F1: Changes the name of the selected breaker setting.
F2: Changes the oil flow rate of the selected breaker set-
ting.
F3: Moves to the next item (1 line below). When on the last
line, it moves to the first line.
F4: Moves to the previous item (1 line above). When on the first line, it moves to the last line.
F5: Cancels the selection and returns the screen to the "Machine Setting" menu screen.
F6: Allocates the selected setting to the setting when B mode is selected.
Changing the "Breaker Setting" name
You can change the breaker setting name as you like.
You can use alphabet letters A to Z, Arabic numerals 0 to 9, symbols #, *, +, -, and /, and the space.
1.
On the "Breaker Setting" screen, select a setting to change
its name, then press switch F6.
2.
The "Breaker Name Setting" screen is displayed.
On the "Breaker Name Setting" screen, you can perform
the following operations with switches F1 to F6.
F1: "CLEAR" Clears all the letters. (If some letters are left.)
F1: "DEFAULT" Displays the initial name. (If all the letters
are deleted.)
F2: Moves to the right letter.
F3: Moves to the next alphabet, numeral, or symbol.
F4: Moves to the previous alphabet, numeral, or symbol.
F5: Returns the screen to the "Breaker Setting" screen
without changing the name.
F6: Enters the change and returns the screen to the "Breaker Setting" screen.
Changing "Breaker Oil Flow Rate Setting"
1.
On the "Breaker Setting" screen, select a setting to change
its oil flow rate, then press switch F2.
3-70
OPERATION