Komatsu HB365LC-3 Operation & Maintenance Manual page 173

OPERATION EXPLANATION OF COMPONENTS
The travel lever is used to change the direction of travel be-
tween forward and reverse. ( ) shows the pedal operation.
(a) FORWARD
The lever is pushed forward
(Depress the front side of pedal.)
(b) REVERSE
The lever is pulled back
(Depress the rear side of pedal.)
N (NEUTRAL)
The machine stops.
REMARK
If the lever is shifted to FORWARD or REVERSE position from
NEUTRAL position, the alarm sounds to warn that the machine
is starting to move.
WORK EQUIPMENT CONTROL LEVER
The L.H. work equipment control lever is used to operate the
arm and upper structure.
Arm control
(a): Arm OUT
(b): Arm IN
Swing control
(c): Swing RIGHT
(d): Swing LEFT
N (NEUTRAL)
The upper structure and arm are held in position and do not move.
The R.H. work equipment control lever is used to operate the
boom and bucket.
Boom control
(a): Boom RAISE
(b): Boom LOWER
Bucket control
(c): Bucket DUMP
(d): Bucket CURL
N (NEUTRAL)
The boom and bucket are held in position and do not move.
3-101