Table of Contents
Advertisement
ATTACHMENTS AND OPTIONS
AA: Standard screen, BB: Enlarged bird's eye view display, CC: Camera image screen
•
On the standard screen AA, the synthesized image to show the area around the machine from above and
the image of the camera loaded into the machine are displayed on the left and right sides of the machine
monitor, respectively.
•
If you press the switch F3 on the standard screen AA, the enlarged bird's eye view image is displayed.
•
If the switch F3 is pressed on the enlarged bird's eye view display BB, the screen CC of the camera image
is displayed. On the screen CC of the camera image,the camera image is displayed in the entire monitor.
•
If the switch F3 is pressed on the camera image screen CC, the standard screen AA is displayed.
CAMERA IMAGE SELECTOR SWITCH
By pressing the switch F4, you can switch the in-car camera to
switch between the image of the right and left of the machine
and that of the back.
On the start screen, the camera image switch display flashes in
the position shown in the figure.
The green range of the camera image switch display shows of
which camera the image is displayed.
Camera switch display
The shooting direction of the camera loaded into the machine
is as follows:
(1) Back of the machine
(2) Left of the machine
(3) Front right of the machine
(4) Right of the machine
Displayed camera position
Rear camera
Front right camera
Right camera
Left camera
KomVision
6-45
Advertisement
Chapters
Table of Contents
