Komatsu HB365LC-3 Operation & Maintenance Manual page 400

MAINTENANCE PROCEDURE
(1) Boom cylinder rod pin (2 places)
(2) Arm cylinder foot pin (1 place)
(3) Boom and arm connection pin (1 place)
(4) Arm cylinder rod end (1 place)
(5) Bucket cylinder foot pin (1 place)
(6) Boom cylinder foot pin (2 places)
(7) Boom foot pin (2 places)
3.
After greasing, wipe off any old grease that is pushed out.
METHOD FOR CHANGING OIL IN ENGINE OIL PAN, REPLACING ENGINE OIL
FILTER CARTRIDGE
Immediately after the engine is stopped, its parts and oil are still very hot, and may cause burn injury.
Wait for the temperature to go down, and then start the work.
Refill capacity of oil pan: 38.5 ℓ
Items to be prepared
• Container to catch the drained oil
4-52
k k
WARNING
MAINTENANCE