Komatsu HB365LC-3 Operation & Maintenance Manual page 149

OPERATION
MAINTENANCE SCREEN SETTING
Each item of setting menu (e) on "Maintenance" screen is used
for displaying and setting the notification relevant to mainte-
nance.
The items on Maintenance display are as follows.
a
Air Cleaner Cleaning or Change
Coolant Change
Additional Hyd Oil Filter Change
Hyd Oil Pilot Filter Change
Engine Oil Change (*1
Engine Oil Filter Change (*1
Fuel Prefilter Change
Fuel Main Filter Change
Hyd Oil Tank Breather Change
Hydraulic Oil Filter Change
Swing Machinery Case Oil Change
DEF Tank Breather Change
Gen Oil Change & Filter Clean
Electric Swing Motor Oil Change
Final Drive Case Oil Change
DEF Filter Change
KCCV Filter Change
KDPF Filter Cleaning
DEF Tank Washing
Hydraulic Oil Change
a: Maintenance items
b: Default maintenance interval settings (h)
c: Time remaining to maintenance (h)
*1:
When using the engine oil for cold district, the maintenance interval setting must be changed. For details of the
oil, see "RECOMMENDED FUEL, COOLANT, AND LUBRICANT (7-5)".
On "Maintenance" menu screen, you can perform the following
operations with switches F1 to F6.
F1, F2: Moves to the right and left menus.
F3: Moves to the next item (1 line below). When it is on the last
line, it moves to the first line.
F4: Moves to the previous item (1 line above). When it is on the
first line, it moves to the last line.
F5: Returns the screen to the standard screen.
F6: If this switch is kept pressed, the screen changes to the
screen for resetting the remaining time to the maintenance
for the selected item.
b
-
-
-
-
500
500
500
1000
1000
1000
1000
1000
1000
1000
2000
2000
2000
4500
4500
5000
EXPLANATION OF COMPONENTS
3-77