Table of Contents
Advertisement
OPERATION
CONTROL LEVERS AND PEDALS
(1) Lock lever
(2) Travel levers (with pedal and auto-deceleration
system)
(3) L.H. work equipment control lever (with auto-decel-
eration system)
LOCK LEVER
•
Set the lock lever securely to LOCK position when leaving the operator's seat. If the lock lever is not
at LOCK position and the control levers or control pedals are touched by mistake, it may lead to
serious personal injury or death.
•
Check that the lock lever is securely in LOCK position.
•
Be careful not to touch the work equipment control lever when pulling up the lock lever or pushing
it down.
•
Before setting the lock lever to FREE position, make sure that all control levers and pedals are set
to NEUTRAL position. If any of them is out of NEUTRAL position, the work equipment or machine
may move suddenly and cause a serious personal injury or death.
The lock lever is a device to lock the work equipment, swing,
travel, and attachment (if equipped) operations.
(L) LOCK position
Machine does not move even if the control levers or attach-
ment control pedals (if equipped) are operated.
(F) FREE position
Machine moves according to the operation of levers or attach-
ment control pedals (if equipped).
REMARK
Machine does not move when the lock lever is in LOCK posi-
tion (L) while the control levers or control pedals move since
the lock lever is of hydraulic lock type.
(4) R.H. work equipment control lever (with auto-de-
celeration system)
k
k
WARNING
EXPLANATION OF COMPONENTS
3-99
Advertisement
Chapters
Table of Contents
