Komatsu HB365LC-3 Operation & Maintenance Manual page 195

OPERATION
REMARK
• The explanation of the manual stationary regeneration
is displayed in 3 parts on the monitor panel. When
function switch F6 is pressed, the regeneration can be
started immediately, regardless of which part is dis-
played. When the function switch F5 is pressed, the
screen returns to the standard screen.
• If the monitor switch is not operated for 30 seconds,
the explanation of the manual stationary regeneration
is displayed for 30 seconds, and then the screen re-
turns to the standard screen. At this time, to display
the explanation of the manual stationary regeneration
again, press the function switch F6 on the standard
screen to display "Aftertreatment Devices Regenera-
tion" screen.
7.
This screen is displayed during the manual stationary re-
generation. It may take more than 40 minutes to complete
the manual stationary regeneration. Do not touch any
switch on the screen or operate fuel control dial until the
regeneration is completed and the standard screen ap-
pears again.
EXPLANATION OF COMPONENTS
3-123