Komatsu HB365LC-3 Operation & Maintenance Manual page 463

ATTACHMENTS AND OPTIONS
METHOD FOR OPERATING MACHINE WHEN WORKING MODE IS NOT IN
BREAKER MODE
Change the working mode and enter the Breaker Mode.
1.
Press the working mode selector switch (1).
The screen changes to the working mode selection
screen.
2.
Press the working mode selector switch (1) or press the
switches F3 or F4 to select the Breaker Mode B.
3.
With the breaker mode B highlighted in yellow, do one of
the following to enter the selection.
1)
Hold down the working mode selector switch (1).
2)
Press the switch F6.
3)
Leave as it is for 5 seconds.
If you enter the selection of the Breaker Mode, the confir-
mation message is displayed.
When a special attachment is installed, if the mode is switched to the Breaker Mode carelessly, it may
lead to serious danger, such as falling of the work equipment.
4.
Press the switch F6 to enter the Breaker Mode.
CHECK POINTS WHEN USING BREAKER
• Is the stop valve in FREE position?
HANDLE MACHINE READY FOR INSTALLATION OF ATTACHMENT
k k
WARNING
6-21