Komatsu HB365LC-3 Operation & Maintenance Manual page 242

MACHINE OPERATIONS AND CONTROLS
Adjust the mirror so that the side of the machine is reflected in
it as shown in the figure.
PROCEDURE FOR ADJUSTING MACHINE RIGHT SIDE MIRROR (C)
The following conditions must be met before starting the work to prevent the machine from moving dur-
ing the work.
• The machine is placed on a level ground.
• The work equipment is lowered to the ground in secure posture.
• The lock lever is in LOCK position.
• The engine is stopped.
• Adjust it so that people within 1 m around the machine can
be seen from the operator's seat.
(W): 1 m
3-170
k k
CAUTION
OPERATION