Komatsu HB365LC-3 Operation & Maintenance Manual page 84

EXPLANATION OF COMPONENTS
On the ID number input screen LL (with SKIP), press the
switch F1, and the screen changes to the check before
starting screen BB without inputting ID number.
REMARK
• Contact your Komatsu distributor for the method of setting,
changing, or canceling the operator identification function.
• Depending on the set value of ID holding time in set items
of operator identification function, even if inputting ID num-
ber for operator identification setting is set, the ID number
input screen LL (with SKIP) or MM (without SKIP) may not
be displayed while the starting switch is turned to ON posi-
tion.
If inputting the incorrect ID number for 3 times continuously, you cannot input the ID number for 5 minutes. Wait
for more than 5 minutes, try inputting the ID number again.
As long as the ID number input screen is displayed, the engine cannot be started. If you forget the ID number
and cannot start the engine, ask the person in charge of the machine.
NOTICE
Since the purpose of the operator identification function is neither security enhancement nor a protec-
tion against theft, it has no anti-theft effect. Be careful not to use it for the purpose of security enhance-
ment.
Komatsu cannot accept any responsibility for any loss or damage resulting from the wrong use of ID or
unauthorized use of ID by a third party.
3-12
OPERATION