Komatsu HB365LC-3 Operation & Maintenance Manual page 199

OPERATION
2.
Select the regeneration disable, press the function switch
F6, and the regeneration stops.
REMARK
The regeneration performed to protect the system may not
be stopped, but this is not a failure.
PROCEDURE FOR CANCEL OF AFTERTREATMENT DEVICES REGENERATION
DISABLE SETTING
When canceling the regeneration disable, move the machine to a safe place and check that there is no
person or combustible matter around the machine, and start the cancel operation.
1.
When the switch F6 is pressed on the standard screen,
"Aftertreatment Devices Regeneration" screen is dis-
played.
(If the screen is not displayed, operate the function
switches F1 and F2 to display "Aftertreatment Devices Re-
generation" screen.)
2.
Select the cancel of regeneration disable and press the
function switch F6, and the regeneration disable is can-
celed.
If the soot accumulation level (4) is lit 3 or more, the regen-
eration is started automatically.
REMARK
• When canceling the regeneration disable, set the lock
lever to LOCK position and set the fuel control dial to
Low idle (MIN) position, then cancel the regeneration
disable.
• The regeneration disable setting is also canceled by
turning the starting switch to OFF position to stop the
engine.
k k
CAUTION
EXPLANATION OF COMPONENTS
3-127