Komatsu HB365LC-3 Operation & Maintenance Manual page 147

OPERATION
2.
Select the set time on the "Auto Idle Stop Timer Setting"
screen shown in the figure, and then press the switch F6.
On "Auto Idle Stop Timer Setting" screen, it is possible to
perform the following operations with switches F3 to F6.
F3: Moves to the next item (1 line below). When it is on the
last line, it moves to the first line.
F4: Moves to the previous item (1 line above). When it is
on the first line, it moves to the last line.
F5: Cancels the selection and returns the screen to "Ma-
chine Setting" menu screen.
F6: Allocates the selected setting to that of the auto idle stop timer setting.
REMARK
• If you select "OFF", the auto idle stop function does not operate.
• You cannot select a time longer than that specified in the service menu.
3.
When the idling time reaches 30 seconds before the set
time, the machine monitor returns to the standard screen
and changes to the countdown screen.
If you set the lock lever to FREE position, countdown stops
and the screen returns to the standard screen.
4.
When the countdown reaches 0, the engine stops and the
screen changes to "Auto Idle Stop in Operation" screen.
5.
To prevent battery discharging, turn off the unnecessary
switches.
REMARK
While the auto idle stop is activated, only the engine is
stopped and the machine monitor, inverter, etc., as well as
the electrical components including the air conditioner, ra-
dio, lamps, and windshield wipers keep their states before
the engine is stopped.
6.
To prevent causing flat battery, turn the starting switch to OFF position.
7.
When restarting the engine, turn the starting switch key as usual.
EXPLANATION OF COMPONENTS
3-75