Komatsu HB365LC-3 Operation & Maintenance Manual page 323

OPERATION
1.
Remove connector (A) of the revolving lamp.
When removing the connector, pull it out while pressing
the claw in the center of the connector.
2.
Place the connector for wiring (B) in a clean vinyl bag or
the like to protect it from water, etc. during transportation
and fix it to the operator's cab with sealing tape or the like.
3.
Tilt down lock (D) of revolving lamp bracket (C).
4.
Remove the hook of lock (D) from the claw of base bracket
(E).
5.
Hold grip (G) and turn it clockwise, seeing it from the rear
of the machine.
TRANSPORTATION
3-251