Komatsu HB365LC-3 Operation & Maintenance Manual page 393

MAINTENANCE
1.
Turn the starting switch to ON position (B).
2.
Keep pressing the test button (9) for 3 to 5 seconds.
The system performs the one cycle test. The green LED
(4) of the selected lubrication interval on the display inside
the cab (2) flashes (lit 2 seconds, not lit 2 seconds) while
this test is being proceeded.
In order to provide additional grease to all grease points (i.
e. after cleaning the machine) or to vent the system, a con-
tinuous lubrication cycle run can be performed.
Procedure for continuous lubrication test
Perform the continuous lubrication test in order to check the system.
1.
Turn the starting switch to ON position (B).
MAINTENANCE PROCEDURE
4-45