Table of Contents
Advertisement
3
Reader Installation
Please install the VICTOR Nivo according to the instructions given in the VICTOR
Nivo Installation Guide which is provided with the reader.
If the reader is to be installed with the optional stacker module, see also chapter 7
"Stacker Module (Optional)", page 47.
3.1
Hardware Requirements
3.1.1
Computer Hardware
The reader can be operated with any desktop PC, laptop or tablet.
l
For best user interface experience a screen resolution of 1920 x 1080 pixels is
l
recommended.
4 GB or more internal memory is recommended.
l
Any printer that is compatible with your computer can be used.
l
3.1.2
Control Device Power Options
1. Disable any sleep or hibernate mode and other energy saving options of the
control device and do not shut down the control device while VICTOR Nivo is
operating.
2. If the connection to the control device is interrupted (e.g. network disconnected,
control device switched off or browser tab closed), a running measurement is
nevertheless continued and its results are saved. You can re-establish the
connection and log in again.
3. During longer (kinetic) measurements it is recommended to operate the control
device using the power supply and not the battery.
4. Make sure that the time, date and time zone of your control device are set
correctly. These settings are also applied to the VICTOR Nivo and the control
software.
If you change any of the time settings on the control device, you have to switch
off the VICTOR Nivo, unplug it from the mains and then restart it to have the
time re-synchronized.
How to disable the sleep mode (described for Windows
1. Open Control Panel > All Control Panel Items > Power Options.
2. Click Change plan settings to change the settings of the selected power plan.
VICTOR Nivo – User Manual
3 Reader Installation
®
10):
17
Hide quick links:
Advertisement
Table of Contents
