LEGRAND Server Technology PRO1 User Manual page 48

Configuration
The Configuration option allows administrative access to all options for setting PDU values. The pages are
organized into three major areas of configuration:
•
System (options for hardware areas)
•
Network (options for setting up network protocols)
•
Access (options for local/remote user access and management)
Network
The Network option provides network setup options for the protocols supported by PRO1 units: DHCP/IP,
Email/SMTP, FTP/SFTP, HTTP/HTTPS, LDAP, RADIUS, SNMP, SNTP, Syslog, TACACS+, and Telnet/SSH. The Network
option only allows the administrator to set up network protocol parameters. To configure how the user will access
and use the network and system, see the Access option.
Access
The Access option determines how a user works with the network and system by configuring the options related
to a user: authentication, privilege levels, user access to the unit, and additional functions for individual local
users and user groups. The Access option only allows the administrator to configure how the user will access and
use the network and system. To set up network protocol parameters, see the Network option.
Tools
The Tools option is a collection of several utility options for miscellaneous system actions: changing user
password, pinging other network devices, viewing the system/debug log, and uploading new firmware versions.
Also included are several options for rebooting the PDU, resetting the PDU to factory defaults, and restarting the
PDU with user preferences.
PRO1 Sentry Switched DC PDU
48 of 211