LEGRAND Server Technology PRO1 User Manual page 120

To Configure Zero Touch Provisioning:
Note: ZTP is enabled "out of the box" by default for PDUs running firmware version 8.0g or later. The Automatic
Updates option of ZTP is shipped disabled by default.
1. Zero Touch Provisioning (ZTP): Check or uncheck the checkbox to enable/disable ZTP with the following
results:
•
Enable: The ZTP option allows automated configuration for PRO1 products.
•
Disable: (Default) The ZTP option is turned off and the "Non Provisioned" state displays.
If necessary, click the Reset button. See "Resetting ZTP" above.
2. Automatic Updates: Check or uncheck to enable/disable the automatic updates option. When enabled,
Automatic Updates takes priority over the "Provisioned" or "Not Provisioned" status.
3. Select the Scheduled Day of the week (or Everyday) for automatic updates to occur.
4. Select the Scheduled Hour of the day for automatic updates to occur.
5. Click the Apply button.
PRO1 Sentry Switched DC PDU
120 of 211