Chapter 5: Using The Web Interface (Gui) - LEGRAND Server Technology PRO1 User Manual

Chapter 5: Using the Web Interface (GUI)

This chapter shows how to work with the Web firmware GUI (version 8.p or later) for the Sentry DC PDU.
Logging In
Logging into the Web interface directs the Web client to the configured IP address of the Switched unit.
To login by Web interface:
In the firmware login window, provide a valid username and password, and click OK. If you enter an invalid
username or password, you will be prompted again. Three attempts are given for a valid username/password
combination, after which the session ends and a protected page will be displayed
Note: The default firmware username/password is admn/admn. There is no "i" in admn.
PRO1 Sentry Switched DC PDU
45 of 211