Appendix B: Uploading Firmware - LEGRAND Server Technology PRO1 User Manual

Appendix B: Uploading Firmware

You can upload new versions of firmware using File Transfer Protocol (FTP) and Secure File Transfer Protocol
(SFTP). These methods allow access to new firmware releases for firmware improvements and new feature
additions.
Note: To begin an FTP upload session, you must first configure the FTP Host address, username/password,
filename, and file path.
You can initiate an FTP upload session by issuing a command or from the Web interface. Upon initiating an FTP
upload session, the unit will restart and upload the firmware file specified with the FTP Filename command from
the previously configured FTP Host. You must have administrator-level access to initiate an upload.
Initiate an FTP Upload Session from the Web Interface
On the Restart page in the Tools section of the Web interface, select "Restart and download firmware via FTP"
from the drop-down menu and click Apply.
Initiate an FTP Upload Session from the Command Line Interface (CLI)
To initiate an FTP firmware upload session:
At the Switched -48 VDC: prompt, type restart ftpload and press Enter.
PRO1 Sentry Switched DC PDU
204 of 211