LEGRAND Server Technology PRO1 User Manual page 147

Command
login
logmon
logout
lstat
off
on
ostat
password
ping
pstat
reboot
Remove Commands
remove group
remove ldapgroup
remove snmpuser
remove ups
remove user
restart
senstat
Set Commands
set access
set branch
set cord
set feature
Description
Performs system login and access verification.
Displays the system log (monitor) messages in the CLI session as they occur.
Quits the current CLI session.
Displays the latest status and metrics for all lines in the system.
Turns off the specified outlet or outlet group.
Turns on the specified outlet or outlet group.
Displays the latest status and metrics for all outlets in the system.
Changes the password for the current local user.
Tests the ability of the PDU to contact an IP address for another Ethernet-enabled device.
Displays the latest status and metrics for all phases in the system.
Turns off the specified outlet or outlet group, and then turns it back on after a delay.
The Remove command group removes outlet groups, LDAP groups, UPS devices, and local users
from the system.
Removes an outlet group from the system.
Removes an LDAP group from the system.
Removes an SNMPv3 user from the system.
Removes a UPS from the system.
Removes a local user from the system.
Restarts the system.
Displays the latest status and metrics for all sensors in the system.
The Set command group sets the configuration values for numerous system areas.
Sets user configuration access.
Sets branch configuration values.
Sets cord configuration values.
Enables new system features.
PRO1 Sentry Switched DC PDU
147 of 211