Show Network - LEGRAND Server Technology PRO1 User Manual

show network

Command Syntax
Command Access
Example
Shows network configuration values.
show network
Admin level only
Switched PDU: show network
Network Configuration
State: Static IPv4
Link: Up
Speed: 100 Mbps
Ethernet MAC: 00-0A-9C-60-00-0A
AutoCfg IPv6: FE80::20A:9CFF:FE60:A/64
IPv4 Address: 10.1.2.205
IPv4 Gateway: 10.1.1.1
DNS1: 10.1.5.133
DNS2: 10.1.5.134
Static IPv4/IPv6 Settings
IPv6 Address: FD01::A01:305/64
IPv6 Gateway: FD01::A01:585
IPv4 Address: 10.1.2.205
IPv4 Gateway: 10.1.1.1
DNS1: 10.1.5.133
DNS2: 10.1.5.134
DHCP Settings
DHCP: disabled
FQDN: enabled [sentry-ffffff]
Boot Delay: disabled
Static Fallback: enabled
ZTP (0-Touch): enabled (not provisioned)
Network Services
FTP Server: enabled
FTP Updates: disabled
SSH: enabled
Telnet: enabled
HTTP: enabled
HTTPS: enabled
User Cert: enabled
SNMPv1/2: enabled
SNMPv3: disabled
Web Svc API: enabled
SPM Access: enabled
PRO1 Sentry Switched DC PDU
Network:
Negotiation:
Duplex:
Subnet Mask:
Subnet Mask:
Port: 21
Port: 21
Port: 22 Auth:
Port: 23
Port: 80
Port: 443 Installed Cert: Factory
SSL User Certificates:
User Passphrase: <none>
Uploaded Files: None
Port: 161 TrapPort:
Port: 161 TrapPort:
190 of 211
IPv4 only
Auto
Full
255.255.0.0
255.255.0.0
Password, Kb-Int
enabled
162
162