LEGRAND Server Technology PRO1 User Manual page 110

To add a new user:
Note: Up to eight new users can be added to SNMPv3, each user with its own access rights.
From the SNMPv3 Users page (at top of page):
1. In the SNMPv3 User Name field, provide a name (1-31 characters) for the new user.
2. From the Access drop-down menu, select an option to determine SNMPv3 access rights for the new user:
Disabled (default), Read Only, Write Only, or Read/Write.
3. Select an Authentication Method from the drop-down menu: None (default), MD5 authentication only, or
MD5 authentication and DES privacy.
4. Provide an authentication password (1-31 characters) for the new user.
5. Provide a privacy password (1-31 characters) for the new user.
6. Click Apply.
To edit an SNMP user:
From the SNMPv3 Users page (at bottom of page):
1. For an SNMPv3 user in the list, click the Edit link to display the following page:
2. Confirm that the user name selected is the one you want to edit.
3. Revise settings as needed for Access, Authentication Method, Authentication Password, and Privacy
Password.
4. Click Apply.
To delete an SNMP user:
From the SNMPv3 Users page (at bottom of page):
1. For an SNMPv3 user in the list, click the Remove link.
2. The prompt "Are you sure" displays to confirm or cancel the deletion. Click OK or Cancel. If OK, the user
will be permanently removed from the SNMPv3 user list.
PRO1 Sentry Switched DC PDU
110 of 211