LEGRAND Server Technology PRO1 User Manual page 179

set tacpriv
Command Syntax
Parameters
Sub-Parameters
Command Access
Sets TACACS+ configuration values for privilege level access rights.
set tacpriv access [admin | ononly | poweruser | rebootonly | user | viewonly] <priv level>
set tacpriv sysmon [disabled | enabled] <priv level>
The set tacpriv command uses the following parameters:
access Sets the access type for a level.
Note: On-Only, Reboot-Only, and View-Only are available for Switched PRO1
products.
sysmon Sets the system monitor access for a level.
The set tacpriv command uses the following sub-parameter:
priv level The ID of the TACACS+ privilege level to change access rights (0-15).
Admin level only
PRO1 Sentry Switched DC PDU
179 of 211