LEGRAND Server Technology PRO1 User Manual page 119

Network > ZTP
The Network > ZTP page provides the settings for using the optional Zero Touch Provisioning (ZTP) feature. ZTP
allows PDUs to be provisioned and configured automatically during the initial bootup, or whenever needed, to
automate network setup, user permission updates, and other PDU modifications as necessary.
About Automatic Provisioning:
Automatic and continuous provisioning means you can revise the ZTP configuration file (config.ini) as needed and
push the file down through the ZTP process multiple times. ZTP will recognize the latest revisions in the
configuration file, giving you the flexibility of a ZTP process for maintenance as well as for initial provisioning.
Note: For more information about ZTP and the automatic provisioning methodology used with PRO1 products,
see the Server Technology website www.servertech.com for Technical Note: 303-9999-44,
"Zero Touch Provisioning".
Resetting ZTP:
Reset is available only when ZTP is enabled. When reset to "Not Provisioned", the PDU will attempt ZTP again
after the next RESTART, behaving as it did prior to being provisioned.
After a PDU has been successfully provisioned by ZTP, to use the GUI to reset ZTP to re-provision the PDU again
either after the next RESTART or next DHCP lease renewal, click the Reset button on the ZTP window.
Note that the PDU's provisioned state ("Provisioned" or, "Not Provisioned") is not reset by disabling ZTP. When
ZTP is re-enabled on a previously provisioned PDU, the state will still show as provisioned.
PRO1 Sentry Switched DC PDU
119 of 211