LEGRAND Server Technology PRO1 User Manual page 176

Parameters
The set sensor command uses the following parameters:
adc Sets the analog-to-digital converter sensor. min 0, max 255, hyst 0-20 (default 1).
contact Sets the contact closure sensor.
fan Sets the fan values when a fan is present.
humid Sets the humidity sensor. min 0%RH, max 100%RH, hyst 0-20%RH (default 2%RH).
temp Sets temperature sensor. For Celsius: min -40°, max 123°, hyst 0-30°, default 1°; For
Fahrenheit: min -40°, max 253°, hyst 0-54°, default 2°.
water Sets the water sensor.
email Sets the email notifications for sensor events.
hyst Sets the hysteresis between event state and recovery.
name Sets the name of the sensor.
snmpt SNMP trap notifications for sensor events.
scale Sets temperature scale.
PRO1 Sentry Switched DC PDU
176 of 211