LEGRAND Server Technology PRO1 User Manual page 148

Command
set ldapgroup
set line
set location
set outlet
set phase
set port
set sensor
set snmpuser
set tacpriv
set unit
set ups
set user
Show Commands
show access
show branches
show cords
show email
show features
show ftp
show ldap
show lines
show lldp
show log
show network
show outlets
Description
Sets configuration values for LDAP group access rights.
Sets line configuration values.
Sets the system location string.
Sets outlet configuration values.
Sets phase configuration values.
Sets serial port configuration values.
Sets sensor configuration values.
Sets SNMPv3 user configuration values.
Sets TACACS+ configuration values for privilege level access rights.
Sets configuration values.
Sets UPS device configuration values.
Sets configuration values for local user access rights.
The Show command group displays the current configuration values in the system.
Shows user access configuration values.
Shows branch configuration values.
Shows cord configuration values.
Shows email configuration values.
Shows the enabled system features.
Shows FTP configuration values.
Shows LDAP configuration values.
Shows line configuration values.
Show Link Layer Discovery Protocol (LLDP) configuration values.
Shows the system event log.
Shows network configuration values.
Shows outlet configuration values.
PRO1 Sentry Switched DC PDU
148 of 211