LEGRAND Server Technology PRO1 User Manual page 114

Network > TACACS+
The TACACS+ page allows configuration for TACACS+ server options, encryption key, and user privilege levels.
To Configure TACACS+ Server Options:
1. Type the hostname/IP address in the Primary/Secondary Host fields (IPv4 or IPv6 format).
2. Type the new port number or accept the default 49 as shown in the screen example. The PDU uses the
port number to send TACACS+ requests.
3. Click Apply.
About the TACACS+ Encryption Key:
The encryption key is used to encrypt all data packets between the PDU and the TACACS+ server:
•
The key must match the key configured on the TACACS+ server.
•
The key can be up to 60 alphanumeric characters and is case sensitive.
•
For security, characters in the key are not displayed.
•
If you provide "0" for the key, the result may be that the key is not applied, as "0" may not be supported
by the TACACS+ server. It is recommended for product environment and security not to enter "0" for the
key.
•
The Encryption Key Status field on the screen displays "(set)" or "(not set)" to indicate current status of
the key.
To Configure the Encryption Key:
1. Type the New Encryption Key in the field provided.
2. Click Apply.
PRO1 Sentry Switched DC PDU
114 of 211