LEGRAND Server Technology PRO1 User Manual page 144

Command Syntax Notes
The following conventions apply to the command syntax shown in the Command Details section:
[argument] mandatory argument that is not prompted for.
[argument] optional argument that is not prompted for.
<argument> argument that will be prompted for if not specified on the command line.
{argument} argument that can only be prompted for.
Example (for the SET ACCESS command):
set access
Command Syntax
Sets user access configurations.
set access button [disabled | enabled]
set access clitimeout <value>
set access localadmin [required | optional]
set access logorder [newest | oldest]
set access method [localonly | ldaponly | ldaplocal | radiusonly | radiuslocal |
tacacsonly | tacacslocal]
set access prompt <prompt string>
set access strongpw [optional | required]
set access webloglen <value>
set access webtimeout <value>
PRO1 Sentry Switched DC PDU
144 of 211