LEGRAND Server Technology PRO1 User Manual page 163

password
Command Syntax
Command Access
ping
Command Syntax
Parameters
Command Access
pstat
Command Syntax
Command Access
reboot
Command Syntax
Usage Guidelines
Command Access
Changes the password for the current local user.
Password {password} {verify password}
Any access level
Tests the reachability of a host on the IP network.
ping <hostname>
The ping command uses the following parameter.
hostname Specifies the host to ping, 0-63 characters.
Any access level
Displays the latest status and metrics for all phases in the system.
pstat
System monitor access
Turns off the specified outlet or outlet group and then turns it back on after a delay.
reboot <name | id | group | ALL>
The Reboot command is for Switched PRO1 products only.
Reboot-Only users or User level and above
PRO1 Sentry Switched DC PDU
163 of 211