Network > HTTP/HTTPS
The HTTP/HTTPS page configures server options for HTTP, HTTPS (secure web server), and SSL, including user-
defined certificates. The page also determines secure access settings for the Sentry Power Manager (SPM)
enterprise software product and for the Web services API.
To configure HTTP and HTTPS/SSL servers/ports:
1. Server: Check (or uncheck) the Enable checkboxes to enable/disable support for the HTTP and/or
HTTPS/SSL server options.
2. Port: Type a port number or accept the default HTTP/HTTPS/SSL port numbers as displayed. The HTTP
default port number is 80; the SSL default port number is 443.
3. Click Apply.
NOTES:
•
SSL-encrypted (HTTPS) must be used for secure website connections.
•
A current web browser with TLS1.2 support is required. Current version of IE, Firefox, Chrome, Opera,
are supported.
•
The HTTPS server uses the first matching cipher from the client preference list. For more information about PRO1
firmware-supported ciphers, go to
•
With the support of TLS1.2, self-signed X.509 certificates now use a 2048-bit key and SHA256 as the signature hash
algorithm. It is highly recommended (and may even be required by some web browsers), that old/weaker self-
signed certificates be removed from certificate stores and new/stronger certificates be regenerated and accepted
into certificate stores.
•
The number of concurrent HTTP/S sessions supported depends on the web browser in use.
www.servertech.com
PRO1 Sentry Switched DC PDU
100 of 211
for the technical note: 303-9999-12, PDU Security.
and Safari
Need help?
Do you have a question about the Server Technology PRO1 and is the answer not in the manual?