The User Interfaces; Usernames And Passwords - LEGRAND Server Technology PRO1 User Manual

The User Interfaces

Server Technology's Sentry DC PDU has two user interfaces:
•
Web interface (GUI) accessed by the HTTP(S)-enabled Ethernet connections
•
Command Line Interface (CLI) for serial and Telnet connections.
Both interfaces allow power monitoring of data points, temperature/humidity measurements, system/network
configuration, outlet control, user account management, and numerous other operations for the Sentry DC PDU.
Either interface can be used as preferred; most firmware operations can be performed on GUI screens or by CLI
commands on the command line. When using either interface, the availability of firmware functions for your user
login account depends on your current user access rights as granted by the system administrator.

Usernames and Passwords

The Sentry DC PDUs are shipped with one default administrative user account (username/password is
admn/admn). Note: There is no "i" in the admn username or
Only an administrative user can manage user accounts, such as creating new user accounts, removing user
accounts, and changing user passwords.
The PDU supports a maximum of 112 defined user accounts with the following restrictions:
User Account
Usernames
Passwords
Note: For security, Server Technology recommends first creating a new user account with administrative
rights, and then removing the default admn account.
Length Case-Sensitive
1-32 characters No
1-32 characters Yes
PRO1 Sentry Switched DC PDU
password.
Spaces Allowed
No
Yes
39 of 211