Epygi Quadro2x Administrator's Manual page 8

Quadro Baseline
The System Configuration page contains the host name, IP
address and Subnet Mask information about the Quadro LAN
interface. These settings make Quadro available to the internal
network.
The System Configuration page offers the following input
options:
Host Name requires a host name for the Quadro device.
IP Address requires the Quadro host address for the LAN
interface.
Subnet Mask requires the Quadro hosts' Subnet Mask.
The Regional Settings and Preferences are used to select
settings specific to the location of the Quadro. This is important
for the functionality of the voice subsystem.
The Regional Settings and Preferences page has two drop
down lists to select
corresponding Timezone. This page also has a radio button
group to choose:
•
System Language – selection is available only when the
custom Language Pack has been uploaded and it is used
to enable custom language for system voice messages or
returning back to the default language English.
•
GUI Theme - selection used to select the GUI theme style
of the web based configuration pages.
The Emergency Codes and PSTN Access Codes Settings
are used to configure the dial plan parameters used in the
routing mode.
The Emergency Codes text field requires the PSTN numbers
of the emergency or lifeline services. Multiple emergency
codes, separated by commas, can be inserted in this field. For
each emergency code, a routing pattern will be generated in
the Call Routing Table, which will allow faster and easier calls
to emergency destinations.
The PSTN Access Code drop down list allows you to select
the prefix code for accessing the PSTN line in the routing
mode. Dialing the digits inserted in this text field will provide
the PSTN dial tone when in the routing mode or when making
routing calls (for routing calls an additional "0" will need to be
dialed first.)
Quadro2x, Quadro2xi; SW Version 4.0.x
Quadro2x Manual II: Administrator's Guide – Administrator's Graphical User Interface
the Location (country) and a
Fig. II-6: System Configuration Wizard - Emergency Codes and PSTN Codes Settings page
Fig. II-4: System Configuration Wizard - System Configuration page
Fig. II-5: System Configuration Wizard - Regional Settings page
8