Update Configuration - Epygi Quadro2x Administrator's Manual

Quadro Baseline
Please Note: Unlike the factory default settings restore procedure initialized from the Reset button on the Quadro board, this link will keep the
following data:
•
Call Statistics
•
Transfer Statistics
•
System Events
•
Feature Keys
•
Device Registration state
The U pdate Configuration
2 6 0 H
edited.

Update Configuration

The Update Configuration allows to automatically or manually updating Quadro's configuration, as well as downloading a legible and editable
configuration file, making necessary changes and uploading it back to the system. This allows you to use parts of the configuration of one Quadro on
another Quadro with some changes done prior to uploading the new configuration. The Quadro reseller, distributor, ISP or carrier usually uses this
service.
Attention: It is strongly recommended to consult with the
technical support center before making changes on this page.
Incorrect settings here may corrupt current configurations.
This page consists of the following components:
Server and Server Port text fields require an IP address or Host
name and the port number of the server configuration where
they will be downloaded from.
The Update Method drop down list indicates the connection
type used to download the configuration (ftp, tftp, http or https).
The Enable Version Check checkbox selection enables version
verification before the configuration is being downloaded.
Attention: Disabling the Enable Version Check checkbox may
cause incompatibility problems on the device.
The Update Interval Selection manipulation radio-button group
is used to select the frequency of configuration checks/updates
performed on the Quadro:
•
Check/Update at boot time – with this option, new
available configuration will be checked/updated each time
Quadro boots.
•
Check/Update manually – with this option, configuration
check/upload will be performed only by manual selection.
•
Check/Update time/date scheduled – with this option new
available configurations
periodically depending on the selected time and/or
weekday. This selection enables Time Based and
Weekday Based checkboxes. Selecting one or both of
them allows you to define the time and the weekday when
configuration checks/updates
performed.
The Update Policy Selection manipulation radio-button group is used to select the operation performed on the following selections:
•
Check only for update – with this option, the system will only perform checking of the availability of new suitable configuration and will log
corresponding event in the
•
Check and update immediately - with this option, the system will check the availability and correspondingly update the new configuration and
will log corresponding event in the Events table (depending on the configuration in Events Settings).
•
Check and update immediately without any feedback - with this option, the system will check the availability and correspondingly update the
new configuration but will not log any events on this.
The Check now for new update functional button performs manual checking of the availability of new configurations and logs corresponding event
in the Events table (depending on the configuration in Events Settings).
The Update now functional button performs manual checking and update of the availability new configuration and logs corresponding event in the
Events table (depending on the configuration in Events Settings).
Quadro2x, Quadro2xi; SW Version 4.0.x
Quadro2x Manual II: Administrator's Guide – Administrator's Graphical User Interface
link leads you to the page where Quadro's configuration can be automatically or manually updated, downloaded and
will be checked/updated
will be automatically
E vents table (depending on configuration in Events Settings).
2 6 1 H
:
Fig. II-29 Upload Configuration page
19